$2,844.80
Original: $8,127.99
-65%9500 U3D8411818 | Type 12, 13 | 3 door freestanding cabinet for safety disconnect mounted on right flange - 84x118x18 | EXM—
$8,127.99
$2,844.80The Story
The 9500 UxD oil and dust tight right flange mounted safety disconnect enclosures are used indoors for protection against dirt, dust, oil and water splashing. One, two or three door combinations are available. The 9500 UxD are made from quality code gauge steel with all seams continuously welded. Most center posts can be removed (refer to drawings) to facilitate the installation of the inner panel. The ball bearing pins of the concealed die cast hinges can be easily pulled out to remove the doors. Three point automotive padlockable handles ensure positive closing on all doors. The new latching rod system interlocks with the disconnect handle and eliminates the need to purchase an adaptor. A door interlock is installed to ensure that the left hand door(s) (slave) can only be opened if the right hand door (master) is open and the disconnect switch is powered off. Door and body stiffeners are provided on larger models. Each enclosure comes complete with a galvanized inner panel which mount on M10 welded studs. A print pocket is provided. Enclosures are finished with heat fused powder paint, electro-statically applied on a pretreated base. Box is ANSI/ASA 61smooth gray. Inner panel is galvanized (other colors available). CSA Certified / UL Listed NEMA/EEMAC 12-13 / IP55
Made of high quality steel, with continuously welded corner seams. The doors are secured by padlockable 3 point lock mechanisms. A system prevents the opening of the secondary doors when the master door (right) is closed. The enclosure has die cast hinges, with stainless steel captive pins. The body's construction is designed to prevent dripping water from entering the enclosure. The left center post is removable to facilitate the installation of the inner panel. A bracket prevents the opening of the door when the electric circuit is not closed. Paint color: ANSI 61 smooth gray. CSA Certified. UL Listed. NEMA 12, 13. IEC 60529 IP55.
Made of high quality steel, with continuously welded corner seams. The doors are secured by padlockable 3 point lock mechanisms. A system prevents the opening of the secondary doors when the master door (right) is closed. The enclosure has die cast hinges, with stainless steel captive pins. The body's construction is designed to prevent dripping water from entering the enclosure. The left center post is removable to facilitate the installation of the inner panel. A bracket prevents the opening of the door when the electric circuit is not closed. Paint color: ANSI 61 smooth gray. CSA Certified. UL Listed. NEMA 12, 13. IEC 60529 IP55.
Resources
More Info
^^The 9500 U3D series is used for indoor use and to protect the equipment against ingress of oil, dust, dirt and water.Description
The 9500 UxD oil and dust tight right flange mounted safety disconnect enclosures are used indoors for protection against dirt, dust, oil and water splashing. One, two or three door combinations are available. The 9500 UxD are made from quality code gauge steel with all seams continuously welded. Most center posts can be removed (refer to drawings) to facilitate the installation of the inner panel. The ball bearing pins of the concealed die cast hinges can be easily pulled out to remove the doors. Three point automotive padlockable handles ensure positive closing on all doors. The new latching rod system interlocks with the disconnect handle and eliminates the need to purchase an adaptor. A door interlock is installed to ensure that the left hand door(s) (slave) can only be opened if the right hand door (master) is open and the disconnect switch is powered off. Door and body stiffeners are provided on larger models. Each enclosure comes complete with a galvanized inner panel which mount on M10 welded studs. A print pocket is provided. Enclosures are finished with heat fused powder paint, electro-statically applied on a pretreated base. Box is ANSI/ASA 61smooth gray. Inner panel is galvanized (other colors available). CSA Certified / UL Listed NEMA/EEMAC 12-13 / IP55
Made of high quality steel, with continuously welded corner seams. The doors are secured by padlockable 3 point lock mechanisms. A system prevents the opening of the secondary doors when the master door (right) is closed. The enclosure has die cast hinges, with stainless steel captive pins. The body's construction is designed to prevent dripping water from entering the enclosure. The left center post is removable to facilitate the installation of the inner panel. A bracket prevents the opening of the door when the electric circuit is not closed. Paint color: ANSI 61 smooth gray. CSA Certified. UL Listed. NEMA 12, 13. IEC 60529 IP55.
Made of high quality steel, with continuously welded corner seams. The doors are secured by padlockable 3 point lock mechanisms. A system prevents the opening of the secondary doors when the master door (right) is closed. The enclosure has die cast hinges, with stainless steel captive pins. The body's construction is designed to prevent dripping water from entering the enclosure. The left center post is removable to facilitate the installation of the inner panel. A bracket prevents the opening of the door when the electric circuit is not closed. Paint color: ANSI 61 smooth gray. CSA Certified. UL Listed. NEMA 12, 13. IEC 60529 IP55.
Resources
More Info
^^The 9500 U3D series is used for indoor use and to protect the equipment against ingress of oil, dust, dirt and water.
